Eldes EKB3 Manuel d'installation télécharger pdf (Page 56)

56 EN

MANUAL ELDES ESIM264 V3.1

Enable zone

SMS

SMS text message content:

ssss_Znn:ON

Value: ssss – 4-digit SMS password; nn – zone number, range – [1... 44].

Example: 1111_Z6:ON

EKB2

Menu path:

On-board zone: OK → CONFIGURATION → OK → aaaa → OK → ZONES → OK → ONBOARD

ZONES → OK → ZONE 1... 12 → OK → STATUS → OK → ENABLE → OK

Wireless zone: OK → CONFIGURATION → STATUS → aaaa → OK → ZONES → OK → WIRELESS

ZONES → OK → WLESS ZONE 1... 16 → OK → STATUS → OK → DISABLE → OK

Keypad zone: OK → CONFIGURATION → OK → aaaa → OK → ZONES → OK → KEYPAD ZONES

→ OK → KEYPAD 1... 4 ZONE → OK → STATUS → DISABLE → OK

EPGM1 zone: OK → CONFIGURATION → OK → aaaa → OK → ZONES → OK → EPGM1 ZONES →

EPGM1 ZONE 1... 16 → OK → STATUS → DISABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 52, zone number & parameter status value:

52 nn 1 #

Value: nn – zone number, range – [01... 44].

Example: 52151#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

15. STAY MODE

Stay mode allows the user to arm and disarm the alarm system without leaving the secured area. If the zones with Stay attribute enabled

are violated when the system is Stay armed, no alarm will be caused. Typically, this feature is used when arming the system at home before

going to bed.

The system can be Stay armed under the following conditions:

• If a zone with Stay attribute enabled is NOT violated during exit delay, the system will arm in Stay mode. When arming the system in

Stay mode under this condition, one of the available arming methods must be used that provide exit delay. For more details on these

methods, please refer to 13. EXIT AND ENTRY DELAY.

• The system will instantly arm in Stay mode when using one of the following methods.

Arm the system in

Stay mode

EKB2

Menu path:

P2 → uuuu → OK

Value: uuuu – 4-digit user password.

EKB3

Press the [STAY] key & enter user password:

STAY uuuu

Value: uuuu – 4-digit user password.

Example: STAY1111

When the system is successfully armed in Stay mode, EKB2 keypad will display STAY message in the home screen view.

ATTENTION: System arming in Stay mode by the keypad must be carried out without Conguration mode being activated.

NOTE: The system can be armed in Stay mode, only if there is at least one zone with Stay attribute enabled.

NOTE: Stay mode is not supported by virtual zones.

For more details on how to enable Stay attribute for zone, please refer to 14.6. Zone Attributes.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 167 168

Commentaires sur ces manuels

Pas de commentaire

Eldes EKB3 Manuel d'installation Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Eldes EKB3