Eldes EKB3 Manuel d'installation télécharger pdf (Page 127)

127

127EN

MANUAL ELDES ESIM264 V3.1

32.2. EW1 - Wireless Zone & PGM Output Expansion Module

Main EW1B features:

• 2 zones for wired sensor connection;

• 2 PGM outputs for electrical appliance connection;

• Powered by external power supply.

Wireless expansion module EW1 is a wireless device with 2 zones and 2 PGM outputs. This expansion module connects to ELDES wireless

alarm systems and enables wireless access for to 2 wired devices such as movement PIR sensors, magnetic door contacts etc. In addition it

allows to connect and control up to 2 appliances, i.e. lighting, heating etc. After the wiring process to EW1 it is necessary to bind EW1 to the

alarm system by sending a corresponding command via SMS text message or using software ELDES Conguration Tool.

It is possible to connect up to 16 EW1 devices to ESIM264 alarm system at a time. The maximum wireless connection range is 150 meters (in

open areas).

32.2.1. Technical Specications

32.2.1.1. Electrical & Mechanical Characteristics

Power Supply 7-15V 20mA max

Number of Zones 2

Zone Connection Type Normally closed (NC)

Number of PGM Outputs 2

Maximum Commuting PGM Output Values Voltage – 30V; current 500mA

EW1 PGM Output Circuit

1 R

OUT

Open collector

output.

Output is pulled to

COM when turned on.

Wireless Transmitter-Receiver Frequency 868 MHz

Range of Operating Temperatures -20...+55ºC

Dimensions 38x60x12mm

Humidity

0-90% RH @ 0... +40 °C (non-condensing)

Wireless Communication Range Up to 30 meters in premises; up to 150 meters in open areas

Compatible with Alarm Systems ELDES Wireless

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 167 168

Pas de commentaire

Eldes EKB3 Manuel d'installation Page 127