Eldes EKB3 Manuel d'installation télécharger pdf (Page 33)

33EN

MANUAL ELDES ESIM264 V3.1

9. DATE AND TIME

The system comes equipped with internal real-time clock (RTC) that keeps track of the current date and time. Once the system is up and

running, the user must set the correct date and time, otherwise the system will not operate properly. After shutting down and starting up

the system, the date and time must be set again.

Set date and time

SMS

SMS text message content:

ssss_yyyy.mm.dd_hr:mn

Value: ssss – 4-digit SMS password; yyyy – year; mm – month, range – [01... 12]; dd – day,

range – [01... 31]; hr – hours, range – [00... 23]; mn – minutes, range – [00... 59].

Example: 1111_2013.03.16_14:33

EKB2

Menu path:

a) OK → DATE/TIME SETTINGS → OK →yyyy-mm-dd hr:mn → OK

b) OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → DATE/TIME

SETTINGS → OK → yyyy-mm-dd hr:mn → OK

Value: aaaa – 4-digit administrator password; yyyy – year; mm – month, range – [01... 12];

dd – day, range – [01... 31]; hr – hours, range – [00... 23]; mn – minutes, range – [00... 59].

EKB3

Enter parameter 66, date & time:

66 yyyy mm dd hr mn#

Value: yyyy – year; mm – month, range – [01... 12]; dd – day, range – [01... 31]; hr – hours,

range – [00... 23]; mn – minutes, range – [00... 59].

Example: 66201305291235#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

NOTE: When the system is connected to the monitoring station via GPRS network connection (see 30. MONITORING STATION) and/or

when ELDES Smart Security feature is in use (see 35. ELDES Smart Security), the date and time will be automatically synchronized with

the monitoring station or ELDES Smart Security server upon the system startup.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 167 168

Pas de commentaire

Eldes EKB3 Manuel d'installation Page 33