Eldes EKB3 Manuel d'installation télécharger pdf (Page 26)

26 EN

MANUAL ELDES ESIM264 V3.1

The following table provides a list of EKB3 indications, which are relevant during Conguration mode.

Indication Description

Indicator ARMED ashing Conguration mode activated successfully.

Indicator SYSTEM ashing Valid parameter is entered and waiting for valid value to be enetered.

1 long beep Non-existing command or invalid parameter value entered.

3 short beeps Command entered successfully.

NOTE: The system can be congured using only one keypad at a time. Other connected keypads will be inactive while the Congura-

tion mode is activated.

NOTE: Conguration mode will automatically deactivate if 1 minute after the last key-stroke expires.

Cong

Tool

Software ELDES Conguration Tool is intended for ESIM264 alarm system conguration via USB port locally or via GPRS con-

nection remotely. This software simplies system conguration process by allowing to use a personal computer in the process.

Before starting to use ELDES Conguration Tool software, please read the user guide provided in the software’s HELP section.

ELDES Conguration Tool is freeware and can be downloaded from at: www.eldes.lt

Remote System Conguration via GPRS Connection

ATTENTION: The system will NOT send any data to monitoring station while conguring the system remotely via GPRS network. However,

during the conguration session, the data messages are queued up and transmitted to the monitoring station after the conguration

session is over.

ATTENTION: When the Conguration mode is activated by EKB3 keypad or menu section CONFIGURATION is opened by EKB2 keypad,

remote system conguration will be disabled.

NOTE: The keypads will be inactive when the system is being congured remotely.

Before conguring ESIM264 remotely via GPRS connection, make sure that:

• SIM card is inserted into SIM CARD1 slot of ESIM264 device (see 2.2. Main Unit, LED & Connector Functionality).

• Mobile internet service (GPRS) is enabled on the SIM card.

• Power supply is connected to ESIM264.

• Default SMS password is changed to a new 4-digit password (see 6. PASSWORDS).

• At least User 1 phone number is set up (see 8. USER PHONE NUMBERS).

• APN, user name and password are set up (see 30.2.1. GPRS Network).

Establishing Remote Connection Between ESIM264 System and Conguration Server

Initiate the

connection

to ELDES server

In order to activate a remote GPRS connection between ESIM264 system and ELDES conguration

server please , send the following SMS text message from user phone number.

Upon the successful SMS text message delivery, the system establishes a connection session for

20 minutes. An SMS reply, containing device IMEI number and conrming a successful connection

establishment, is sent shortly.

SMS

SMS text message content:

ssss_STCONFIG

Value: ssss – 4-digit new SMS password.

Example: 1111_STCONFIG

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 167 168

Commentaires sur ces manuels

Pas de commentaire

Eldes EKB3 Manuel d'installation Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Eldes EKB3